HangerMate Threaded Rod Anchoring Systems: Tools & Drill Bits




The HangerMate threaded rod anchoring system speeds installation of fire sprinkler, general piping, electrical and related systems. They can also be used to install strut channels, cable trays, suspended ceiling grids, bridle rings and eye-rods and can replace beam clamps, stud pins, eye sockets, or ceiling flanges.

HangerMate anchors are solid, one-piece, cold formed and machined anchors, so the heads will not spin off. Each head is precision drilled and tapped. Thread and point styles are engineered for maximum performance in their target material.

Genuine HangerMate installation tool components install HangerMate anchors quickly, easily and with single-hand cycling for reduced installer fatigue.

Made in the U.S.A.

View Technical Guide (pdf)

View Flash Animation
Anchors and Tools By Application Material
Steel Concrete Multi-Purpose
For 1/4" Rod For 3/8" Rod For 1/4" and 3/8" Rod For 1/4" and 3/18" Rod
Light-Gage Steel Wood Adaptor for 1/2" Rod
(Use with any anchor for 3/8" rod)
For 1/4" and 3/8" Rod For 1/4" and 3/8" Rod

Grid | List (1 to 8 of 8) « Prev | Next »
7/32" X 5-1/2" ARTU Drill Bit

7/32" X 5-1/2" ARTU Drill Bit

7/32" X 5-1/2" drill bit with cobalt and tungsten carbide tip for exceptional performance when drilling in concrete, marble, tile, plaster and other masonry materials. For rotary or percussion drilling. Can be used in cordless or corded drills or dri
$5.85
Drill Bit With Stopping Collar: 25/64" Diameter

Drill Bit With Stopping Collar: 25/64" Diameter

25/64" drill bit with stopping collar designed to limit penetration. Use to install HFZJ300 inserts. Price per each.
$6.94
HangerMate Tools: Drive Sleeve for Concrete Applications

HangerMate Tools: Drive Sleeve for Concrete Applications

Designed to speed installation of concrete applications, since drilling is required. Simply slip the drive sleeve over the drill bit and lock onto its hex collar, then use to set anchors.
$11.03
HangerMate Tools:  LG Drive Tool

HangerMate Tools: LG Drive Tool

Manual tool used to set collapsing insert of HangerMate LG anchors into light-gage steel. The "T" handle can be removed to allow use with power tool.
$37.59
HangerMate Tools: SDS Drill Bit (1/4" x 5-1/2" ANSI)

HangerMate Tools: SDS Drill Bit (1/4" x 5-1/2" ANSI)

Carbide-tipped masonry bit for SDS-drive drills in concrete applications.
$6.53
HangerMate Tools: Standard Drive Socket for Steel or Wood Applications

HangerMate Tools: Standard Drive Socket for Steel or Wood Applications

Designed for use with a contractor-grade screw gun, hammer drill or rotary hammer in steel and wood applications. Simply insert appropriate HangerMate anchor into drive socket, position and drive. The drive socket's SafetySet feature will set the anc
$9.01
HangerMate Tools: Tanged Drill Bit (1/4" x 4-1/2" ANSI)

HangerMate Tools: Tanged Drill Bit (1/4" x 4-1/2" ANSI)

Carbide-tipped masonry bit for keyed chuck-type drills in concrete applications. Use with HFZE240 bit adapter.
$1.85
HangerMate Tools: Tanged Drill Bit Adapter and Hex Key Kit

HangerMate Tools: Tanged Drill Bit Adapter and Hex Key Kit

Use with tanged drill bits to provide hex collar on drill bit.
$6.94
Grid | List (1 to 8 of 8) « Prev | Next »
Hurripanel Fasteners Inc.
2128 Springwood • Carrollton, TX 75006 support@hurripanel.com
1.972.417.8882 or toll free 1.877.424.7616